Xiaomi Redmi 3S is a popular budget smartphone that runs on the Android operating system. If you are experiencing issues with your device, one of the solutions is to flash the stock ROM. Flashing the stock ROM will reinstall the operating system on your device and restore it to its original state. In this article, we will guide you on how to flash the Xiaomi Redmi 3S Stock ROM using Android file flash.
Before you start flashing your Xiaomi Redmi 3S Stock ROM using Android file flash, there are some crucial preparation steps that you need to follow.
1. Backup: Before flashing your device, backup all your data, including contacts, messages, apps, and files to avoid data loss.
2. Charge: Ensure that your battery percentage is above 50%. The flashing process could take some time and may consume more battery power.
3. Download Xiaomi Driver and ADB tools: Before initiating any operation related to firmware flashing or unlocking bootloader make sure you have installed ADB Tool kit in order to use Fastboot command further for installing firmware files.This tool can be downloaded from official website of xiaomi for free.
4. Download Xiaomi Redmi 3S Firmware file: To flash the firmware of your Xiaomi Redmi 3S phone using Android File Flasher tool download newest MIUI ROM available for it from official website.Without this file no software update can be performed on this model.
Step 1: Download and Install Android File Flasher
The first step is downloading an Android File Flasher for Windows or Mac OS from trusted sources such as XDA developers’ forum or other trusted developer communities online.Software should be downloaded according system specifications,and then install it on PC.Read all instructions carefully before installation.
Step 2: Download Mi Firmware
Once you have installed the Android File Flasher, the next step is to download the Xiaomi Redmi 3S Stock ROM firmware file to your PC. The firmware file should be in .tgz format.
Step 3: Enable USB Debugging
To connect your Xiaomi Redmi 3S phone with your PC, you need to enable USB debugging mode on your device. To do this, follow these steps:
1. Go to Settings on your device.
2. Scroll down and tap on About Phone.
3. Locate Build Number and tap on it seven times until you see a message stating that You are now a developer!
4. Go back to Settings and scroll down until you find Developer Options.
5. Tap on Developer Options and locate USB Debugging.
6. Enable USB Debugging by toggling the button.
Step 4: Connect Your Device to PC
Connect your Xiaomi Redmi 3S device to your computer via a micro USB cable, make sure that it is properly connected.
Step 5: Boot Your Device into Fastboot Mode
To boot your Xiaomi Redmi 3S phone into fastboot mode, follow these steps:
1. Hold down the Volume Down key and Power button simultaneously for about five seconds until you see the fastboot screen appearon mobile screen.It’ll show Mi Bunny image with some options.
Step 6: Open Android File Flasher
Once that is done,you need to run Android File Flasher app on computer in order to begin flashing operation.
Step 7: Load Mi Firmware onto Android File Flasher Tool
Click on the select button in the Mi Firmware area of the tool window which will prompt browsing all folders present in PC where firmware files are saved.Choose firmware file meant for Xiaomi Redmi 3s mobile model & click Ok.
Step 8: Begin Flashing Process
Once pressing Ok button flashing process will start automatically.During this process Device will be restarted once & then it will show Done message on screen which indicates that flashing has been done successfully.
In this article, we have covered different aspects of flashing Xiaomi Redmi 3S stock ROM using Android file flash. It is essential to follow instructions and have everything in place before starting the process. A wrong move could lead to irreversible damage to your device. Always remember to backup your data before initiating the flashing process. Following all recommendations will result in having a perfectly working device without any issues or errors.